The parts of a tent include ground lock firmware, tent bracket, zipper and so on.
Ground fasteners: At least 1 ground fastener on each corner of the tent, if the tent is not rectangular, at least 4 ground fasteners should be provided.
Tent support: Each part of the tent support should be clearly marked for construction (unless there is only one installation form of the tent support or a detailed structural drawing is provided). If it is necessary to combine the tent bracket, the vertical weight of the lower bracket should be at least twice its own weight.
The bracket is connected together by a tubular joint, the minimum length of which shall be 2 times its outside diameter.
Zipper: The pull head should not be the same color as the chain teeth and the cloth strap, unless the pull piece connected to the pull head has a very distinct color. The zipper on the door should be equipped with a double pull head.
Pyramid tent is suitable for 1-3 people, it is not difficult to build, rain and wind are good, suitable for beginners. But it has a large footprint and little head space.
The park speed tent is suitable for 1-2 people to use, convenient to build, but only suitable for beaches, parks and other places where the environment is better, not suitable for strict environment, camping novice is very suitable.
The roof tent is suitable for 2-4 people, good ventilation, waterproof and rain proof. However, due to the house-type structure, it is difficult to build some parts, and there are certain requirements for the site.
Yurt tent suitable for 4-8 people, large space, strong comfort. But most of the material is cotton, not easy to take care of, heavy weight, more trouble to build.
.jpg)
