The thermal sealing process of the oil containment boom is a key step to ensure its structural integrity and functionality. The following are the detailed steps and key points of the heat sealing production process of the oil fence:
1. Material preparation
Material selection: Choose rubber materials that are resistant to oil, cold seawater and aging, such as PVC.
Pretreatment: The rubber material is cleaned, dried and other pretreatment to ensure that its surface is free of oil, dust and other impurities.
2. Positioning and placement
Positioning holes and positioning columns: Guide holes are set on the upper sealing edge and lower sealing edge of the oil containment boom body, and positioning holes are set on the workbench for placing positioning columns to initially locate the oil containment boom body.
Guide roller use: The guide roller is placed in the body of the oil fence, which is used to spread the body of the oil fence.
3. Hot closing operation
Prepare the hot bonding machine: Ensure that the hot bonding machine is in normal working condition and connected to one side of the workbench.
Hot sealing operation: Through the hot sealing machine, the upper and lower sealing edges of the oil enclosure are hot sealing operation, so that the material forms a firm combination under the action of hot sealing and pressure.
Mobile adjustment: Because the hot sealing machine is connected to one side of the base, the position can be easily moved and adjusted according to the need to adapt to the processing requirements of different positions.
4. Quality control
Positioning reliability: The positioning column and positioning holes are set to ensure the positioning reliability of the oil containment boom during the hot sealing process.
Flatness check: check whether the oil enclosure after hot closing is flat and there is no obvious uneven phenomenon.
Strength test: The strength test of the oil enclosure after heat sealing is carried out to ensure that it can withstand a certain tension and pressure.
5. Follow-up Procedure
Quality inspection: Comprehensive quality inspection, including appearance inspection, performance testing, etc., for the oil enclosure completed by hot sealing.
Storage and transportation: Proper storage and transportation of qualified oil booms to avoid damage or deformation during subsequent use.
The heat sealing production process of the oil enclosure is a complex and fine process, which requires strict control of each step and link. Through reasonable material selection, pretreatment, positioning and placement, hot sealing operation and quality control steps, the structural integrity and functionality of the oil containment boom can be ensured, and its service life and reliability can be improved.
At the same time, the follow-up treatment is also an important link to ensure the quality of the oil containment boom, which needs to be paid enough attention.
.jpg)
.jpg)
.jpg)
